- Geotechnical materials t...
- Waterproof material test...
- Bridge expansion joint t...
- Mask protective clothing...
- Mechanical properties te...
- Textile material testing...
- Dyeing and finishing clo...
- Down and feather testing...
- Labor protection protect...
- Leather and shoe materia...
- Zipper button testing eq...
- Other material testing e...
- Fiber yarn testing equip...
| YG038H Geomaterial Tensile Creep Test System (Iron Standard) | ||||||||||||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||||||||||||
 【Scope of application】 It is used to determine the creep performance of various geosynthetics under the experimental conditions of 30℃, 40℃ and 50℃ under constant load. The PP material cell length is 450mm, the PE material cell length is 320mm, and the maximum tensile strength is 220KN/m. At least two cells are tested. This machine adopts weight loading and has a digital display function for adding weights, which will not affect the test in the case of power failure. This machine has complete measurement and display functions such as load weight force value display, permanent deformation display, loading time display, and test machine working status prompt. 【Standards compliant】 GB/T11546.1-2008, Q/CR549.2-2016, QB/T2854-2007 【technical parameter】
|