It should be used for creep test at room temperature and high temperature for the evaluation of geotechnical materials-grid products. It is a common equipment used by scientific research institutions, quality inspection...

It should be used for creep test at room temperature and high temperature for the evaluation of geotechnical materials-grid products. It is a common equipment used by scientific research institutions, quality inspection...

The Geosynthetics Creep Test System is used to test the tensile creep and tensile creep rupture properties of geotextiles and related products. It is suitable for products that may cause structural collapse due to prema...

It is used to determine the creep performance of various geosynthetics under the experimental conditions of 30℃, 40℃ and 50℃ under constant load. The PP material cell length is 450mm, the PE material cell length is 3...

The anti-glare board impact test device meets the requirements of the national standard GB/T 24718-2009 "Anti-glare board". The anti-glare board impact test device is specially designed and produced fo...

It is suitable for testing mechanical properties such as breaking strength, breaking elongation and initial modulus of various engineering fibers. A tensile test can be performed on short fibers used in engineering to s...

Used for geosynthetic materials in transportation, water conservancy, tunnels, construction engineering and other industries, including geotextiles, composite geotextiles, geogrids, geomembranes and related products for...

It is mainly used for the mechanical performance test of reflective film, anti-glare board and other products in road traffic safety facilities, such as the tensile load test of reflective film, wind load test of anti-glare board, etc.